1. Introduction
Recovery mode is an essential tool for all Android users, as it helps to troubleshoot many common errors and bugs. But sometimes, even recovery mode fails to solve the problem, and the only solution is to flash a new ROM or firmware. In this article, we will guide you on how to flash a new ROM or firmware in recovery mode.
2. Preparation
Before we dive into the steps of flashing a new ROM or firmware in recovery mode, let's first discuss the essential preparations that you need to make.
2.1. Backup your data
Flashing a new ROM or firmware is a risky process, and there is always a chance of losing your data. Therefore, we highly recommend that you backup your important data, including contacts, messages, photos, videos, and apps. You can use Google Drive or any other cloud storage service to backup your data.
2.2. Charge your device
Flashing a new ROM or firmware can take some time, so make sure that your device is fully charged or at least has 50% battery before starting the process. A low battery can cause the flashing process to fail, and you may end up with a bricked device.
2.3. Download the ROM or firmware
Before flashing a new ROM or firmware in recovery mode, you need to download the correct ROM or firmware for your device. Make sure that you download the correct version for your device, as flashing the wrong ROM or firmware can cause serious damage to your device.
3. Flashing a new ROM or firmware in recovery mode
Now that you have made all the necessary preparations, let's move on to the steps of flashing a new ROM or firmware in recovery mode.
3.1. Reboot into recovery mode
The first step is to reboot your device into recovery mode. To do this, press and hold the power button and the volume down button simultaneously until you see the bootloader screen. Use the volume buttons to navigate to the recovery mode option and press the power button to select it.
3.2. Wipe data and cache
Before flashing a new ROM or firmware, you need to wipe data and cache to prevent any conflicts with the new ROM or firmware. To do this, go to the wipe data/factory reset option in recovery mode and select it. Then, go to the wipe cache partition option and select it.
3.3. Install the ROM or firmware
The next step is to install the new ROM or firmware. To do this, go to the install zip from SD card option in recovery mode and select it. Then, navigate to the downloaded ROM or firmware and select it. The flashing process will take some time, so be patient and do not interrupt the process.
3.4. Reboot your device
Once the flashing process is complete, go to the reboot system now option in recovery mode and select it. Your device will reboot and start with the new ROM or firmware.
4. Conclusion
Flashing a new ROM or firmware in recovery mode can seem intimidating, but if you follow the steps mentioned above, it is a straightforward process. Always remember to backup your data, charge your device, and download the correct ROM or firmware before starting the process. We hope that this guide has been helpful and that you have successfully flashed a new ROM or firmware on your device.
标签: re
版权声明:凡本站注明内容来源:“足球平台出租”的所有作品,版权均属于“足球平台出租”,转载请必须注明中“足球平台出租”。违反者本网将追究相关法律责任。